ZJSGW-P(M) Pneumatic Film High Temp Regulating Valve
Product overview
Product model: ZJSGW-P(M)
Nominal diameter: DN20 ~ 300mm
Nominal pressure: Pn 1.6, 2.5, 4.0, 6.4, 10.0MPa
Ambient temperature: -30 ~ +70℃
Applicable medium: gas, liquid, steam and other media
Drive mode: pneumatic
Design standard: GB/T17213
Flange standard: GB/T9113, JB/T79, HG20594 and other standards
Inspection standard: GB/T4213
Connection type: flange (FF RF RTJ), welding (SW BW), thread (applicable to less than 1 ")
ZJSGW-P(M) Pneumatic Film High Temp Regulating Valve product overview
ZJSGW-P(M) Pneumatic Film High Temp Regulating Valve produced and sold by Baigang valve group, the
multi-spring pneumatic film actuator and low resistance high temperature
regulating valve body composition, multi-spring actuator low height,
light weight, easy to install.
Pneumatic high temperature control valve body flow was S streamline,
with compact, light weight, sensitive, small pressure drop loss, valve
capacity, accurate flow characteristics, easy maintenance, etc., can be
used for harsh working conditions. Pneumatic membrane thermostatic valve
equipped with electric - gas valve positioning or pneumatic - pneumatic
valve positioner, by inputting 4-20mA control signal to control the
operation, can realize the process pipeline fluid medium automatic
regulation and control.
Pneumatic temperature control valve is widely used in gas, liquid,
steam and other media process parameters such as pressure, flow,
temperature, liquid level and other parameters remain at a given value.
Pneumatic high temperature control valve is particularly suitable for
allowing a small amount of leakage, small pressure difference between
the valve and the high temperature of the occasion.
ZJSGW-P(M) Pneumatic Film High Temp Regulating Valve main technical parameters
1 , the valve body
| Body form | Direct casting ball valve |
|
Nominal diameter |
DN20 ~ 300mm |
|
Nominal pressure |
PN 1.6, 2.5, 4.0, 6.4, 10.0 MPa |
|
Flange standard |
GB / T9113, JB / T79, HG20594 and other standards |
|
Connection Type |
Flange (FF RF RTJ), Weld (SW BW), Thread (For 1 "or less) |
|
Cover form |
High temperature type +250 ~ +450 ℃, ultra-high temperature type +250 ~ +560 ℃ |
|
Gland type |
Bolt compression type |
|
Sealed packing |
V-type PTFE packing, PTFE impregnated asbestos packing, asbestos textile packing, graphite packing |
|
Body material |
Cast steel (WCB), stainless steel (CF8, CF8M, CF3, CF3M), chrome molybdenum steel |
2 , the valve parts
| Spool form | Single seat, sleeve structure |
|
Flow characteristics |
Linear, equal percentage |
|
Spool material |
Stainless steel (304,304L, 316,316L) |
3 , implementing agencies and annex, the role of the form
| Actuator type |
ZHA / B multi-spring film actuator |
||||
|
Actuator model |
ZHA / B-22 |
ZHA / B-23 |
ZHAB-34 |
ZHA / B-45 |
ZHA / B-56 |
|
Effective area (cm2) |
350 |
350 |
560 |
900 |
1400 |
|
Travel (mm) |
10,16 |
25 |
40 |
40,60 |
100 |
|
Spring Range (KPa) |
20 to 100 (standard), 20 to 60, 60 to 100, 40 to 200, 80 to 240 |
||||
|
Diaphragm material |
Nylon cloth rubber clip, EPDM clip nylon cloth |
||||
|
Supply pressure |
140 ~ 400KPa |
||||
|
Air source interface |
RC1 / 4 " |
||||
|
Ambient temperature |
|||||
|
Can be equipped with accessories |
Locator, air filter pressure reducer, Paul-valve, hand wheel agencies |
||||
|
The role of form |
Air-off (B) - Valve open during loss of air (FO); Air open (K) - Valve closed during loss of air (FC) |
||||
ZJSGW-P(M) Pneumatic Film High Temp Regulating Valve main performance indicators
|
project |
Without locator | With locator | ||
|
Basic error% |
± 5.0 |
± 1.0 |
||
|
Backlash% |
≤3.0 |
≤1.0 |
||
|
dead zone% |
≤3.0 |
≤0.4 |
||
|
Always point deviation% |
Open air |
Start point |
± 2.5 |
± 1.0 |
|
Start point |
± 5.0 |
± 1.0 |
||
|
Qi off |
Start point |
± 5.0 |
± 1.0 |
|
|
end |
± 2.5 |
± 1.0 |
||
|
Rated travel deviation% |
≤2.5 |
|||
|
Leakage L / h |
0.01% × valve rated capacity |
|||
|
Adjustable range R |
30: 1 |
|||
ZJSGW-P(M) Pneumatic Film High Temp Regulating Valve rated flow coefficient Kv , to allow pressure
| Nominal diameter DN (mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
|
Seat diameter (dn) |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
|
|
Rated flow coefficient (KV) |
Single seat |
6.9 |
11 |
17.6 |
27.5 |
44 |
69 |
110 |
176 |
275 |
440 |
630 |
875 |
1250 |
|
Sleeve |
6.3 |
10 |
16 |
25 |
40 |
63 |
100 |
155 |
250 |
370 |
580 |
900 |
1300 |
|
|
Allowable pressure difference (MPa) |
Single seat |
3.8 |
3.2 |
3.0 |
2.0 |
1.8 |
1.5 |
1.4 |
1.0 |
0,7 |
0.6 |
0.5 |
0.3 |
0.1 |
|
Sleeve |
6.4 |
6.4 |
5.2 |
5.2 |
4.6 |
4.6 |
3.7 |
3.7 |
3.5 |
3.1 |
3.1 |
2.6 |
2.2 |
|
|
Rated travel (mm) |
16 |
25 |
40 |
60 |
100 |
|||||||||
|
Actuator model |
ZHA / B-22 |
ZHA / B-23 |
ZHA / B-34 |
ZHA / B-45 |
ZHA / B-56 |
|||||||||
ZJSGW-P(M) Pneumatic Film High Temp Regulating Valve main connection size
| DN (mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
|
L |
PN16 / 25 |
181 |
184 |
200 |
222 |
254 |
276 |
298 |
352 |
410 |
451 |
550 |
640 |
880 |
|
PN40 |
194 |
197 |
200 |
235 |
267 |
292 |
317 |
368 |
425 |
473 |
640 |
760 |
910 |
|
|
PN64 |
206 |
200 |
210 |
251 |
286 |
311 |
337 |
394 |
440 |
508 |
670 |
810 |
950 |
|
|
H |
PN16 / 25 |
52.5 |
57.5 |
75 |
75 |
85.5 |
92.5 |
100 |
110 |
142.5 |
158 |
170 |
195 |
230 |
|
PN40 |
52.5 |
57.5 |
75 |
75 |
82.5 |
92.5 |
100 |
117.5 |
150 |
167.5 |
187.5 |
205 |
245 |
|
|
PN64 |
65 |
40 |
85 |
85 |
90 |
102.5 |
107.5 |
125 |
172.5 |
195 |
207.5 |
230 |
260 |
|
|
H1 |
370 |
396 |
428 |
428 |
436 |
415 |
464 |
507 |
690 |
840 |
632 |
725 |
882 |
|
|
H2 |
298 |
298 |
298 |
298 |
298 |
380 |
380 |
380 |
510 |
510 |
510 |
650 |
650 |
|
|
H3 |
180 |
180 |
180 |
180 |
180 |
236 |
236 |
236 |
310 |
310 |
310 |
380 |
380 |
|
|
L1 |
280 |
280 |
280 |
280 |
280 |
350 |
350 |
350 |
475 |
475 |
475 |
560 |
560 |
|
|
A |
282 |
282 |
282 |
282 |
282 |
360 |
360 |
360 |
470 |
470 |
470 |
580 |
580 |
|
|
C |
220 |
220 |
220 |
220 |
220 |
270 |
270 |
270 |
320 |
320 |
320 |
400 |
400 |
|
Reminder:
All text, data and pictures in this article are for reference only.To see more details of the ZJSGW-P(M) Pneumatic Film High Temp Regulating Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.
Headquarters Tel: +86-021-57278880
Sales Tel: +86-021-57278881
Fax: +86-021-57278882
E-mail: baigangvalve@163.com
Site: www.3eeutfl.cn
Add: Tinglin Industrial Park, Jinshan District, Shanghai
Sweep Mobile Access
